M155 × 2 Metric Thread Dimensions
Nominal diameter 155 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 153.701 mm. Basic minor diameter: 152.835 mm. Basic major diameter: 155 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 155 | Not specified |
| Pitch | 153.701 | 153.861 |
| Minor | 152.835 | 153.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 155.038 | Not specified |
| Pitch | 153.739 | 153.939 |
| Minor | 152.873 | 153.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 155 | Not specified |
| Pitch | 153.701 | 153.901 |
| Minor | 152.835 | 153.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 155.038 | Not specified |
| Pitch | 153.739 | 153.989 |
| Minor | 152.873 | 153.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 155 | Not specified |
| Pitch | 153.701 | 153.951 |
| Minor | 152.835 | 153.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 155.038 | Not specified |
| Pitch | 153.739 | 154.054 |
| Minor | 152.873 | 153.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 155 | Not specified |
| Pitch | 153.701 | 154.016 |
| Minor | 152.835 | 153.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 155.038 | Not specified |
| Pitch | 153.739 | 154.139 |
| Minor | 152.873 | 153.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 155 | Not specified |
| Pitch | 153.701 | 154.101 |
| Minor | 152.835 | 153.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 154.682 | 154.962 |
| Pitch | 153.473 | 153.663 |
| Root d3 | 152.241 | 152.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 154.682 | 154.962 |
| Pitch | 153.545 | 153.663 |
| Root d3 | 152.313 | 152.508 |
Cutting tap preparation
Pre-drill recommendation: 153 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 154.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.