M155 × 3 Metric Thread Dimensions
Nominal diameter 155 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 153.051 mm. Basic minor diameter: 151.752 mm. Basic major diameter: 155 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 155 | Not specified |
| Pitch | 153.051 | 153.241 |
| Minor | 151.752 | 152.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 155.048 | Not specified |
| Pitch | 153.099 | 153.335 |
| Minor | 151.8 | 152.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 155 | Not specified |
| Pitch | 153.051 | 153.287 |
| Minor | 151.752 | 152.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 155.048 | Not specified |
| Pitch | 153.099 | 153.399 |
| Minor | 151.8 | 152.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 155 | Not specified |
| Pitch | 153.051 | 153.351 |
| Minor | 151.752 | 152.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 155.048 | Not specified |
| Pitch | 153.099 | 153.474 |
| Minor | 151.8 | 152.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 155 | Not specified |
| Pitch | 153.051 | 153.426 |
| Minor | 151.752 | 152.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 155.048 | Not specified |
| Pitch | 153.099 | 153.574 |
| Minor | 151.8 | 152.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 155 | Not specified |
| Pitch | 153.051 | 153.526 |
| Minor | 151.752 | 152.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 154.577 | 154.952 |
| Pitch | 152.779 | 153.003 |
| Root d3 | 150.931 | 151.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 154.577 | 154.952 |
| Pitch | 152.863 | 153.003 |
| Root d3 | 151.015 | 151.271 |
Cutting tap preparation
Pre-drill recommendation: 152 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 153.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.