M155 × 4 Metric Thread Dimensions
Nominal diameter 155 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 152.402 mm. Basic minor diameter: 150.67 mm. Basic major diameter: 155 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 155 | Not specified |
| Pitch | 152.402 | 152.614 |
| Minor | 150.67 | 151.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 155.06 | Not specified |
| Pitch | 152.462 | 152.727 |
| Minor | 150.73 | 151.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 155 | Not specified |
| Pitch | 152.402 | 152.667 |
| Minor | 150.67 | 151.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 155.06 | Not specified |
| Pitch | 152.462 | 152.797 |
| Minor | 150.73 | 151.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 155 | Not specified |
| Pitch | 152.402 | 152.737 |
| Minor | 150.67 | 151.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 155.06 | Not specified |
| Pitch | 152.462 | 152.887 |
| Minor | 150.73 | 151.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 155 | Not specified |
| Pitch | 152.402 | 152.827 |
| Minor | 150.67 | 151.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 155.06 | Not specified |
| Pitch | 152.462 | 152.992 |
| Minor | 150.73 | 151.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 155 | Not specified |
| Pitch | 152.402 | 152.932 |
| Minor | 150.67 | 151.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 154.465 | 154.94 |
| Pitch | 152.092 | 152.342 |
| Root d3 | 149.628 | 150.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 154.465 | 154.94 |
| Pitch | 152.182 | 152.342 |
| Root d3 | 149.718 | 150.033 |
Cutting tap preparation
Pre-drill recommendation: 151 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 153.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.