M140 × 8 Metric Thread Dimensions
Nominal diameter 140 mm; pitch 8 mm.
Basic geometry
Basic pitch diameter: 134.804 mm. Basic minor diameter: 131.34 mm. Basic major diameter: 140 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 140 | Not specified |
| Pitch | 134.804 | 135.084 |
| Minor | 131.34 | 131.97 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 140.1 | Not specified |
| Pitch | 134.904 | 135.259 |
| Minor | 131.44 | 132.24 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 140 | Not specified |
| Pitch | 134.804 | 135.159 |
| Minor | 131.34 | 132.14 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 140.1 | Not specified |
| Pitch | 134.904 | 135.354 |
| Minor | 131.44 | 132.44 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 140 | Not specified |
| Pitch | 134.804 | 135.254 |
| Minor | 131.34 | 132.34 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 140.1 | Not specified |
| Pitch | 134.904 | 135.464 |
| Minor | 131.44 | 132.69 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 140 | Not specified |
| Pitch | 134.804 | 135.364 |
| Minor | 131.34 | 132.59 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 140.1 | Not specified |
| Pitch | 134.904 | 135.614 |
| Minor | 131.44 | 133.04 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 140 | Not specified |
| Pitch | 134.804 | 135.514 |
| Minor | 131.34 | 132.94 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 139.19 | 139.9 |
| Pitch | 134.369 | 134.704 |
| Root d3 | 129.441 | 130.085 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 139.19 | 139.9 |
| Pitch | 134.492 | 134.704 |
| Root d3 | 129.564 | 130.085 |
Cutting tap preparation
Pre-drill recommendation: 132 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 136.5 mm. Approximate formation model. Estimated formation: 64.3%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.