M140 × 2 Metric Thread Dimensions
Nominal diameter 140 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 138.701 mm. Basic minor diameter: 137.835 mm. Basic major diameter: 140 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 140 | Not specified |
| Pitch | 138.701 | 138.861 |
| Minor | 137.835 | 138.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 140.038 | Not specified |
| Pitch | 138.739 | 138.939 |
| Minor | 137.873 | 138.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 140 | Not specified |
| Pitch | 138.701 | 138.901 |
| Minor | 137.835 | 138.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 140.038 | Not specified |
| Pitch | 138.739 | 138.989 |
| Minor | 137.873 | 138.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 140 | Not specified |
| Pitch | 138.701 | 138.951 |
| Minor | 137.835 | 138.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 140.038 | Not specified |
| Pitch | 138.739 | 139.054 |
| Minor | 137.873 | 138.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 140 | Not specified |
| Pitch | 138.701 | 139.016 |
| Minor | 137.835 | 138.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 140.038 | Not specified |
| Pitch | 138.739 | 139.139 |
| Minor | 137.873 | 138.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 140 | Not specified |
| Pitch | 138.701 | 139.101 |
| Minor | 137.835 | 138.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 139.682 | 139.962 |
| Pitch | 138.473 | 138.663 |
| Root d3 | 137.241 | 137.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 139.682 | 139.962 |
| Pitch | 138.545 | 138.663 |
| Root d3 | 137.313 | 137.508 |
Cutting tap preparation
Pre-drill recommendation: 138 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 139.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.