M140 × 6 Metric Thread Dimensions
Nominal diameter 140 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 136.103 mm. Basic minor diameter: 133.505 mm. Basic major diameter: 140 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 140 | Not specified |
| Pitch | 136.103 | 136.353 |
| Minor | 133.505 | 134.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 140.08 | Not specified |
| Pitch | 136.183 | 136.498 |
| Minor | 133.585 | 134.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 140 | Not specified |
| Pitch | 136.103 | 136.418 |
| Minor | 133.505 | 134.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 140.08 | Not specified |
| Pitch | 136.183 | 136.583 |
| Minor | 133.585 | 134.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 140 | Not specified |
| Pitch | 136.103 | 136.503 |
| Minor | 133.505 | 134.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 140.08 | Not specified |
| Pitch | 136.183 | 136.683 |
| Minor | 133.585 | 134.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 140 | Not specified |
| Pitch | 136.103 | 136.603 |
| Minor | 133.505 | 134.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 140.08 | Not specified |
| Pitch | 136.183 | 136.813 |
| Minor | 133.585 | 134.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 140 | Not specified |
| Pitch | 136.103 | 136.733 |
| Minor | 133.505 | 134.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 139.32 | 139.92 |
| Pitch | 135.723 | 136.023 |
| Root d3 | 132.027 | 132.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 139.32 | 139.92 |
| Pitch | 135.833 | 136.023 |
| Root d3 | 132.137 | 132.559 |
Cutting tap preparation
Pre-drill recommendation: 134 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 137.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.