M140 × 3 Metric Thread Dimensions
Nominal diameter 140 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 138.051 mm. Basic minor diameter: 136.752 mm. Basic major diameter: 140 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 140 | Not specified |
| Pitch | 138.051 | 138.241 |
| Minor | 136.752 | 137.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 140.048 | Not specified |
| Pitch | 138.099 | 138.335 |
| Minor | 136.8 | 137.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 140 | Not specified |
| Pitch | 138.051 | 138.287 |
| Minor | 136.752 | 137.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 140.048 | Not specified |
| Pitch | 138.099 | 138.399 |
| Minor | 136.8 | 137.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 140 | Not specified |
| Pitch | 138.051 | 138.351 |
| Minor | 136.752 | 137.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 140.048 | Not specified |
| Pitch | 138.099 | 138.474 |
| Minor | 136.8 | 137.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 140 | Not specified |
| Pitch | 138.051 | 138.426 |
| Minor | 136.752 | 137.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 140.048 | Not specified |
| Pitch | 138.099 | 138.574 |
| Minor | 136.8 | 137.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 140 | Not specified |
| Pitch | 138.051 | 138.526 |
| Minor | 136.752 | 137.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 139.577 | 139.952 |
| Pitch | 137.779 | 138.003 |
| Root d3 | 135.931 | 136.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 139.577 | 139.952 |
| Pitch | 137.863 | 138.003 |
| Root d3 | 136.015 | 136.271 |
Cutting tap preparation
Pre-drill recommendation: 137 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 138.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.