M135 × 6 Metric Thread Dimensions
Nominal diameter 135 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 131.103 mm. Basic minor diameter: 128.505 mm. Basic major diameter: 135 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 135 | Not specified |
| Pitch | 131.103 | 131.353 |
| Minor | 128.505 | 129.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 135.08 | Not specified |
| Pitch | 131.183 | 131.498 |
| Minor | 128.585 | 129.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 135 | Not specified |
| Pitch | 131.103 | 131.418 |
| Minor | 128.505 | 129.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 135.08 | Not specified |
| Pitch | 131.183 | 131.583 |
| Minor | 128.585 | 129.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 135 | Not specified |
| Pitch | 131.103 | 131.503 |
| Minor | 128.505 | 129.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 135.08 | Not specified |
| Pitch | 131.183 | 131.683 |
| Minor | 128.585 | 129.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 135 | Not specified |
| Pitch | 131.103 | 131.603 |
| Minor | 128.505 | 129.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 135.08 | Not specified |
| Pitch | 131.183 | 131.813 |
| Minor | 128.585 | 129.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 135 | Not specified |
| Pitch | 131.103 | 131.733 |
| Minor | 128.505 | 129.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 134.32 | 134.92 |
| Pitch | 130.723 | 131.023 |
| Root d3 | 127.027 | 127.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 134.32 | 134.92 |
| Pitch | 130.833 | 131.023 |
| Root d3 | 127.137 | 127.559 |
Cutting tap preparation
Pre-drill recommendation: 129 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 132.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.