M135 × 2 Metric Thread Dimensions
Nominal diameter 135 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 133.701 mm. Basic minor diameter: 132.835 mm. Basic major diameter: 135 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 135 | Not specified |
| Pitch | 133.701 | 133.861 |
| Minor | 132.835 | 133.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 135.038 | Not specified |
| Pitch | 133.739 | 133.939 |
| Minor | 132.873 | 133.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 135 | Not specified |
| Pitch | 133.701 | 133.901 |
| Minor | 132.835 | 133.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 135.038 | Not specified |
| Pitch | 133.739 | 133.989 |
| Minor | 132.873 | 133.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 135 | Not specified |
| Pitch | 133.701 | 133.951 |
| Minor | 132.835 | 133.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 135.038 | Not specified |
| Pitch | 133.739 | 134.054 |
| Minor | 132.873 | 133.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 135 | Not specified |
| Pitch | 133.701 | 134.016 |
| Minor | 132.835 | 133.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 135.038 | Not specified |
| Pitch | 133.739 | 134.139 |
| Minor | 132.873 | 133.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 135 | Not specified |
| Pitch | 133.701 | 134.101 |
| Minor | 132.835 | 133.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 134.682 | 134.962 |
| Pitch | 133.473 | 133.663 |
| Root d3 | 132.241 | 132.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 134.682 | 134.962 |
| Pitch | 133.545 | 133.663 |
| Root d3 | 132.313 | 132.508 |
Cutting tap preparation
Pre-drill recommendation: 133 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 134.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.