M135 × 3 Metric Thread Dimensions
Nominal diameter 135 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 133.051 mm. Basic minor diameter: 131.752 mm. Basic major diameter: 135 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 135 | Not specified |
| Pitch | 133.051 | 133.241 |
| Minor | 131.752 | 132.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 135.048 | Not specified |
| Pitch | 133.099 | 133.335 |
| Minor | 131.8 | 132.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 135 | Not specified |
| Pitch | 133.051 | 133.287 |
| Minor | 131.752 | 132.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 135.048 | Not specified |
| Pitch | 133.099 | 133.399 |
| Minor | 131.8 | 132.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 135 | Not specified |
| Pitch | 133.051 | 133.351 |
| Minor | 131.752 | 132.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 135.048 | Not specified |
| Pitch | 133.099 | 133.474 |
| Minor | 131.8 | 132.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 135 | Not specified |
| Pitch | 133.051 | 133.426 |
| Minor | 131.752 | 132.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 135.048 | Not specified |
| Pitch | 133.099 | 133.574 |
| Minor | 131.8 | 132.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 135 | Not specified |
| Pitch | 133.051 | 133.526 |
| Minor | 131.752 | 132.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 134.577 | 134.952 |
| Pitch | 132.779 | 133.003 |
| Root d3 | 130.931 | 131.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 134.577 | 134.952 |
| Pitch | 132.863 | 133.003 |
| Root d3 | 131.015 | 131.271 |
Cutting tap preparation
Pre-drill recommendation: 132 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 133.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.