M135 × 4 Metric Thread Dimensions
Nominal diameter 135 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 132.402 mm. Basic minor diameter: 130.67 mm. Basic major diameter: 135 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 135 | Not specified |
| Pitch | 132.402 | 132.614 |
| Minor | 130.67 | 131.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 135.06 | Not specified |
| Pitch | 132.462 | 132.727 |
| Minor | 130.73 | 131.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 135 | Not specified |
| Pitch | 132.402 | 132.667 |
| Minor | 130.67 | 131.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 135.06 | Not specified |
| Pitch | 132.462 | 132.797 |
| Minor | 130.73 | 131.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 135 | Not specified |
| Pitch | 132.402 | 132.737 |
| Minor | 130.67 | 131.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 135.06 | Not specified |
| Pitch | 132.462 | 132.887 |
| Minor | 130.73 | 131.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 135 | Not specified |
| Pitch | 132.402 | 132.827 |
| Minor | 130.67 | 131.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 135.06 | Not specified |
| Pitch | 132.462 | 132.992 |
| Minor | 130.73 | 131.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 135 | Not specified |
| Pitch | 132.402 | 132.932 |
| Minor | 130.67 | 131.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 134.465 | 134.94 |
| Pitch | 132.092 | 132.342 |
| Root d3 | 129.628 | 130.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 134.465 | 134.94 |
| Pitch | 132.182 | 132.342 |
| Root d3 | 129.718 | 130.033 |
Cutting tap preparation
Pre-drill recommendation: 131 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 133.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.