M110 × 6 Metric Thread Dimensions
Nominal diameter 110 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 106.103 mm. Basic minor diameter: 103.505 mm. Basic major diameter: 110 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 110 | Not specified |
| Pitch | 106.103 | 106.353 |
| Minor | 103.505 | 104.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 110.08 | Not specified |
| Pitch | 106.183 | 106.498 |
| Minor | 103.585 | 104.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 110 | Not specified |
| Pitch | 106.103 | 106.418 |
| Minor | 103.505 | 104.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 110.08 | Not specified |
| Pitch | 106.183 | 106.583 |
| Minor | 103.585 | 104.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 110 | Not specified |
| Pitch | 106.103 | 106.503 |
| Minor | 103.505 | 104.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 110.08 | Not specified |
| Pitch | 106.183 | 106.683 |
| Minor | 103.585 | 104.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 110 | Not specified |
| Pitch | 106.103 | 106.603 |
| Minor | 103.505 | 104.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 110.08 | Not specified |
| Pitch | 106.183 | 106.813 |
| Minor | 103.585 | 104.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 110 | Not specified |
| Pitch | 106.103 | 106.733 |
| Minor | 103.505 | 104.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 109.32 | 109.92 |
| Pitch | 105.723 | 106.023 |
| Root d3 | 102.027 | 102.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 109.32 | 109.92 |
| Pitch | 105.833 | 106.023 |
| Root d3 | 102.137 | 102.559 |
Cutting tap preparation
Pre-drill recommendation: 104 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 107.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.