M110 × 3 Metric Thread Dimensions
Nominal diameter 110 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 108.051 mm. Basic minor diameter: 106.752 mm. Basic major diameter: 110 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 110 | Not specified |
| Pitch | 108.051 | 108.241 |
| Minor | 106.752 | 107.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 110.048 | Not specified |
| Pitch | 108.099 | 108.335 |
| Minor | 106.8 | 107.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 110 | Not specified |
| Pitch | 108.051 | 108.287 |
| Minor | 106.752 | 107.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 110.048 | Not specified |
| Pitch | 108.099 | 108.399 |
| Minor | 106.8 | 107.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 110 | Not specified |
| Pitch | 108.051 | 108.351 |
| Minor | 106.752 | 107.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 110.048 | Not specified |
| Pitch | 108.099 | 108.474 |
| Minor | 106.8 | 107.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 110 | Not specified |
| Pitch | 108.051 | 108.426 |
| Minor | 106.752 | 107.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 110.048 | Not specified |
| Pitch | 108.099 | 108.574 |
| Minor | 106.8 | 107.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 110 | Not specified |
| Pitch | 108.051 | 108.526 |
| Minor | 106.752 | 107.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 109.577 | 109.952 |
| Pitch | 107.779 | 108.003 |
| Root d3 | 105.931 | 106.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 109.577 | 109.952 |
| Pitch | 107.863 | 108.003 |
| Root d3 | 106.015 | 106.271 |
Cutting tap preparation
Pre-drill recommendation: 107 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 108.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.