M110 × 4 Metric Thread Dimensions
Nominal diameter 110 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 107.402 mm. Basic minor diameter: 105.67 mm. Basic major diameter: 110 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 110 | Not specified |
| Pitch | 107.402 | 107.614 |
| Minor | 105.67 | 106.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 110.06 | Not specified |
| Pitch | 107.462 | 107.727 |
| Minor | 105.73 | 106.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 110 | Not specified |
| Pitch | 107.402 | 107.667 |
| Minor | 105.67 | 106.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 110.06 | Not specified |
| Pitch | 107.462 | 107.797 |
| Minor | 105.73 | 106.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 110 | Not specified |
| Pitch | 107.402 | 107.737 |
| Minor | 105.67 | 106.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 110.06 | Not specified |
| Pitch | 107.462 | 107.887 |
| Minor | 105.73 | 106.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 110 | Not specified |
| Pitch | 107.402 | 107.827 |
| Minor | 105.67 | 106.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 110.06 | Not specified |
| Pitch | 107.462 | 107.992 |
| Minor | 105.73 | 106.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 110 | Not specified |
| Pitch | 107.402 | 107.932 |
| Minor | 105.67 | 106.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 109.465 | 109.94 |
| Pitch | 107.092 | 107.342 |
| Root d3 | 104.628 | 105.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 109.465 | 109.94 |
| Pitch | 107.182 | 107.342 |
| Root d3 | 104.718 | 105.033 |
Cutting tap preparation
Pre-drill recommendation: 106 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 108.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.