M110 × 2 Metric Thread Dimensions
Nominal diameter 110 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 108.701 mm. Basic minor diameter: 107.835 mm. Basic major diameter: 110 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 110 | Not specified |
| Pitch | 108.701 | 108.861 |
| Minor | 107.835 | 108.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 110.038 | Not specified |
| Pitch | 108.739 | 108.939 |
| Minor | 107.873 | 108.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 110 | Not specified |
| Pitch | 108.701 | 108.901 |
| Minor | 107.835 | 108.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 110.038 | Not specified |
| Pitch | 108.739 | 108.989 |
| Minor | 107.873 | 108.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 110 | Not specified |
| Pitch | 108.701 | 108.951 |
| Minor | 107.835 | 108.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 110.038 | Not specified |
| Pitch | 108.739 | 109.054 |
| Minor | 107.873 | 108.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 110 | Not specified |
| Pitch | 108.701 | 109.016 |
| Minor | 107.835 | 108.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 110.038 | Not specified |
| Pitch | 108.739 | 109.139 |
| Minor | 107.873 | 108.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 110 | Not specified |
| Pitch | 108.701 | 109.101 |
| Minor | 107.835 | 108.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 109.682 | 109.962 |
| Pitch | 108.473 | 108.663 |
| Root d3 | 107.241 | 107.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 109.682 | 109.962 |
| Pitch | 108.545 | 108.663 |
| Root d3 | 107.313 | 107.508 |
Cutting tap preparation
Pre-drill recommendation: 108 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 109.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.