M105 × 6 Metric Thread Dimensions
Nominal diameter 105 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 101.103 mm. Basic minor diameter: 98.505 mm. Basic major diameter: 105 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 105 | Not specified |
| Pitch | 101.103 | 101.353 |
| Minor | 98.505 | 99.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 105.08 | Not specified |
| Pitch | 101.183 | 101.498 |
| Minor | 98.585 | 99.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 105 | Not specified |
| Pitch | 101.103 | 101.418 |
| Minor | 98.505 | 99.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 105.08 | Not specified |
| Pitch | 101.183 | 101.583 |
| Minor | 98.585 | 99.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 105 | Not specified |
| Pitch | 101.103 | 101.503 |
| Minor | 98.505 | 99.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 105.08 | Not specified |
| Pitch | 101.183 | 101.683 |
| Minor | 98.585 | 99.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 105 | Not specified |
| Pitch | 101.103 | 101.603 |
| Minor | 98.505 | 99.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 105.08 | Not specified |
| Pitch | 101.183 | 101.813 |
| Minor | 98.585 | 99.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 105 | Not specified |
| Pitch | 101.103 | 101.733 |
| Minor | 98.505 | 99.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 104.32 | 104.92 |
| Pitch | 100.723 | 101.023 |
| Root d3 | 97.027 | 97.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 104.32 | 104.92 |
| Pitch | 100.833 | 101.023 |
| Root d3 | 97.137 | 97.559 |
Cutting tap preparation
Pre-drill recommendation: 99 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 102.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.