M105 × 2 Metric Thread Dimensions
Nominal diameter 105 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 103.701 mm. Basic minor diameter: 102.835 mm. Basic major diameter: 105 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 105 | Not specified |
| Pitch | 103.701 | 103.861 |
| Minor | 102.835 | 103.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 105.038 | Not specified |
| Pitch | 103.739 | 103.939 |
| Minor | 102.873 | 103.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 105 | Not specified |
| Pitch | 103.701 | 103.901 |
| Minor | 102.835 | 103.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 105.038 | Not specified |
| Pitch | 103.739 | 103.989 |
| Minor | 102.873 | 103.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 105 | Not specified |
| Pitch | 103.701 | 103.951 |
| Minor | 102.835 | 103.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 105.038 | Not specified |
| Pitch | 103.739 | 104.054 |
| Minor | 102.873 | 103.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 105 | Not specified |
| Pitch | 103.701 | 104.016 |
| Minor | 102.835 | 103.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 105.038 | Not specified |
| Pitch | 103.739 | 104.139 |
| Minor | 102.873 | 103.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 105 | Not specified |
| Pitch | 103.701 | 104.101 |
| Minor | 102.835 | 103.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 104.682 | 104.962 |
| Pitch | 103.473 | 103.663 |
| Root d3 | 102.241 | 102.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 104.682 | 104.962 |
| Pitch | 103.545 | 103.663 |
| Root d3 | 102.313 | 102.508 |
Cutting tap preparation
Pre-drill recommendation: 103 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 104.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.