M105 × 4 Metric Thread Dimensions
Nominal diameter 105 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 102.402 mm. Basic minor diameter: 100.67 mm. Basic major diameter: 105 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 105 | Not specified |
| Pitch | 102.402 | 102.614 |
| Minor | 100.67 | 101.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 105.06 | Not specified |
| Pitch | 102.462 | 102.727 |
| Minor | 100.73 | 101.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 105 | Not specified |
| Pitch | 102.402 | 102.667 |
| Minor | 100.67 | 101.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 105.06 | Not specified |
| Pitch | 102.462 | 102.797 |
| Minor | 100.73 | 101.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 105 | Not specified |
| Pitch | 102.402 | 102.737 |
| Minor | 100.67 | 101.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 105.06 | Not specified |
| Pitch | 102.462 | 102.887 |
| Minor | 100.73 | 101.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 105 | Not specified |
| Pitch | 102.402 | 102.827 |
| Minor | 100.67 | 101.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 105.06 | Not specified |
| Pitch | 102.462 | 102.992 |
| Minor | 100.73 | 101.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 105 | Not specified |
| Pitch | 102.402 | 102.932 |
| Minor | 100.67 | 101.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 104.465 | 104.94 |
| Pitch | 102.092 | 102.342 |
| Root d3 | 99.628 | 100.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 104.465 | 104.94 |
| Pitch | 102.182 | 102.342 |
| Root d3 | 99.718 | 100.033 |
Cutting tap preparation
Pre-drill recommendation: 101 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 103.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.