M105 × 3 Metric Thread Dimensions
Nominal diameter 105 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 103.051 mm. Basic minor diameter: 101.752 mm. Basic major diameter: 105 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 105 | Not specified |
| Pitch | 103.051 | 103.241 |
| Minor | 101.752 | 102.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 105.048 | Not specified |
| Pitch | 103.099 | 103.335 |
| Minor | 101.8 | 102.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 105 | Not specified |
| Pitch | 103.051 | 103.287 |
| Minor | 101.752 | 102.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 105.048 | Not specified |
| Pitch | 103.099 | 103.399 |
| Minor | 101.8 | 102.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 105 | Not specified |
| Pitch | 103.051 | 103.351 |
| Minor | 101.752 | 102.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 105.048 | Not specified |
| Pitch | 103.099 | 103.474 |
| Minor | 101.8 | 102.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 105 | Not specified |
| Pitch | 103.051 | 103.426 |
| Minor | 101.752 | 102.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 105.048 | Not specified |
| Pitch | 103.099 | 103.574 |
| Minor | 101.8 | 102.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 105 | Not specified |
| Pitch | 103.051 | 103.526 |
| Minor | 101.752 | 102.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 104.577 | 104.952 |
| Pitch | 102.779 | 103.003 |
| Root d3 | 100.931 | 101.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 104.577 | 104.952 |
| Pitch | 102.863 | 103.003 |
| Root d3 | 101.015 | 101.271 |
Cutting tap preparation
Pre-drill recommendation: 102 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 103.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.