Threads · Unified UN
Unified Inch Thread Calculator
Calculate Unified inch thread dimensions for UNC, UNF, UNEF and constant-pitch UN series using the ASME B1.1-2003 model. Explore standard sizes and tolerance classes.Practical reference
Unified inch thread fundamentals
Understand Unified thread series, TPI, tolerance classes and dimensional limits according to ASME B1.1.What is a Unified inch thread?
Unified inch screw threads use a basic 60° form. The nominal diameter is stated in inches, and pitch is expressed as threads per inch (TPI). A designation identifies the size, series and tolerance class used to specify a thread.
UNC, UNF and UNEF thread series
UNC means Unified Coarse, UNF means Unified Fine and UNEF means Unified Extra Fine. Constant-pitch series such as 8-UN, 12-UN and 16-UN use the stated TPI across their listed diameters. Standard TPI choices depend on the diameter and series; not every series exists at every size.
Nominal diameter, TPI and pitch
The nominal diameter names the thread size; TPI counts threads in one axial inch. Axial pitch in millimetres equals 25.4 / TPI, so 20 TPI gives 1.27 mm. A fractional nominal size identifies the thread, while its permitted manufactured diameters come from the applicable class limits.
Internal and external threads
Internal threads use classes 1B, 2B and 3B; external threads use 1A, 2A and 3A. Their specified diameter limits differ, so select the correct side before using a calculated result.
Major, pitch and minor diameters
Major diameter is the largest basic-profile diameter, minor diameter the smallest, and pitch diameter locates equal thread and space widths on the flanks. Internal D, D2 and D1 and external d, d2 and d1 or root references must be read in their own context. Some product dimensions have no specified upper or lower limit; a calculated reference is not a mandatory manufacturing limit.
Tolerance classes 1A–3A and 1B–3B
The number identifies a class with its own tolerance requirements: class 1 is generally more generous, class 2 is common general-purpose practice and class 3 has tighter limits. A denotes an external thread and B an internal thread. External allowance applies where specified by the class; fit and interchangeability still depend on the complete product requirements.
How to read a Unified thread designation
In 1/4-20 UNC-2B, 1/4 is the nominal diameter in inches, 20 is TPI, UNC is the thread series and 2B is the internal tolerance class. A corresponding external designation may be 1/4-20 UNC-2A.
Basic dimensions and tolerance limits
Basic geometry describes the theoretical thread form. Specified product limits describe permitted manufactured dimensions. The calculator also labels formula-calculated values and reference-only dimensions separately: a calculable diameter is not necessarily a specified product limit, and some listed combinations lack a directly tabulated class row.
Technical references
The calculator uses the ASME B1.1-2003 model. Related standards are listed for context; their complete requirements are not implemented here.
- ASME B1.1-2003 — Unified Inch Screw Threads (UN and UNR Thread Form); the calculator’s principal engineering basis
- ASME B1.30 — related practice for calculating and rounding thread dimensions; full-edition implementation is not claimed
- ASME B1.2 — related gages and gaging reference; inspection and gaging are outside this calculator