Threads · Unified UN
2 5/8-4 4-UN Unified Thread Dimensions
2 5/8-4 4-UN Unified thread: 2.625 in diameter, 4 TPI (0.25 in / 6.35 mm pitch). Explore 1B–3B internal and 1A–3A external dimensions.2 5/8-4 4-UN basic dimensions
Nominal diameter: 2.625 in. 4 threads per inch; pitch 0.25 in (6.35 mm). Basic pitch diameter: 2.4626 in. Basic minor diameter reference: 2.3544 in. These are basic profile dimensions, not product limits.
Calculation basis: ASME B1.1-2003 ordinary uncoated UN threads at standard engagement. No ASME B1.1-2024 claim is made.
Internal thread tolerance classes
Internal class 1B
Table 1 combination; this secondary 4-UN pair is not tabulated in Table 2. Formula-calculated. Product limits are separate from basic and reference dimensions.
| Diameter | Minimum | Maximum |
|---|---|---|
| Major | 2.625 in | Not specified |
| Pitch | 2.4626 in | 2.483 in |
| Minor | 2.354 in | 2.392 in |
Internal class 2B
Table 1 combination; this secondary 4-UN pair is not tabulated in Table 2. Formula-calculated. Product limits are separate from basic and reference dimensions.
| Diameter | Minimum | Maximum |
|---|---|---|
| Major | 2.625 in | Not specified |
| Pitch | 2.4626 in | 2.4762 in |
| Minor | 2.354 in | 2.392 in |
Internal class 3B
Table 1 combination; this secondary 4-UN pair is not tabulated in Table 2. Formula-calculated. Product limits are separate from basic and reference dimensions.
| Diameter | Minimum | Maximum |
|---|---|---|
| Major | 2.625 in | Not specified |
| Pitch | 2.4626 in | 2.4728 in |
| Minor | 2.354 in | 2.3844 in |
Internal major diameter maximum is not specified as a product limit. A calculated reference value must not be used as a normative maximum.
External thread tolerance classes
External class 1A
Table 1 combination; this secondary 4-UN pair is not tabulated in Table 2. Formula-calculated. Product limits are separate from basic and reference dimensions.
| Diameter | Minimum | Maximum |
|---|---|---|
| Major | 2.5862 in | 2.6219 in |
| Pitch | 2.4438 in | 2.4595 in |
| Minor | Not specified | Not specified |
External class 2A
Table 1 combination; this secondary 4-UN pair is not tabulated in Table 2. Formula-calculated. Product limits are separate from basic and reference dimensions.
| Diameter | Minimum | Maximum |
|---|---|---|
| Major | 2.5981 in | 2.6219 in |
| Pitch | 2.449 in | 2.4595 in |
| Minor | Not specified | Not specified |
External class 3A
Table 1 combination; this secondary 4-UN pair is not tabulated in Table 2. Formula-calculated. Product limits are separate from basic and reference dimensions.
| Diameter | Minimum | Maximum |
|---|---|---|
| Major | 2.6012 in | 2.625 in |
| Pitch | 2.4548 in | 2.4626 in |
| Minor | Not specified | Not specified |
External minor diameter product limits are not specified here; the basic minor reference is not an external root limit.
Machining preparation
Cutting tap: estimated pre-drill diameter 2.375 in using D − P. Finished-thread minor limits do not specify drilled-hole tolerance.
Forming tap: indicative pre-drill diameter 2.5128 in at approximately 66% formation. Check the selected tool and material.
Thread milling: finished pitch and minor limits above are available for planning; no cutting-tap pre-drill recommendation or CNC compensation command is supplied for milling.