Threads · Unified UN
4 3/8-4 4-UN Unified Thread Dimensions
4 3/8-4 4-UN Unified thread: 4.375 in diameter, 4 TPI (0.25 in / 6.35 mm pitch). Explore 1B–3B internal and 1A–3A external dimensions.4 3/8-4 4-UN basic dimensions
Nominal diameter: 4.375 in. 4 threads per inch; pitch 0.25 in (6.35 mm). Basic pitch diameter: 4.2126 in. Basic minor diameter reference: 4.1044 in. These are basic profile dimensions, not product limits.
Calculation basis: ASME B1.1-2003 ordinary uncoated UN threads at standard engagement. No ASME B1.1-2024 claim is made.
Internal thread tolerance classes
Internal class 1B
Table 1 combination; this secondary 4-UN pair is not tabulated in Table 2. Formula-calculated. Product limits are separate from basic and reference dimensions.
| Diameter | Minimum | Maximum |
|---|---|---|
| Major | 4.375 in | Not specified |
| Pitch | 4.2126 in | 4.2351 in |
| Minor | 4.104 in | 4.142 in |
Internal class 2B
Table 1 combination; this secondary 4-UN pair is not tabulated in Table 2. Formula-calculated. Product limits are separate from basic and reference dimensions.
| Diameter | Minimum | Maximum |
|---|---|---|
| Major | 4.375 in | Not specified |
| Pitch | 4.2126 in | 4.2276 in |
| Minor | 4.104 in | 4.142 in |
Internal class 3B
Table 1 combination; this secondary 4-UN pair is not tabulated in Table 2. Formula-calculated. Product limits are separate from basic and reference dimensions.
| Diameter | Minimum | Maximum |
|---|---|---|
| Major | 4.375 in | Not specified |
| Pitch | 4.2126 in | 4.2239 in |
| Minor | 4.104 in | 4.1344 in |
Internal major diameter maximum is not specified as a product limit. A calculated reference value must not be used as a normative maximum.
External thread tolerance classes
External class 1A
Table 1 combination; this secondary 4-UN pair is not tabulated in Table 2. Formula-calculated. Product limits are separate from basic and reference dimensions.
| Diameter | Minimum | Maximum |
|---|---|---|
| Major | 4.3358 in | 4.3715 in |
| Pitch | 4.1918 in | 4.2091 in |
| Minor | Not specified | Not specified |
External class 2A
Table 1 combination; this secondary 4-UN pair is not tabulated in Table 2. Formula-calculated. Product limits are separate from basic and reference dimensions.
| Diameter | Minimum | Maximum |
|---|---|---|
| Major | 4.3477 in | 4.3715 in |
| Pitch | 4.1976 in | 4.2091 in |
| Minor | Not specified | Not specified |
External class 3A
Table 1 combination; this secondary 4-UN pair is not tabulated in Table 2. Formula-calculated. Product limits are separate from basic and reference dimensions.
| Diameter | Minimum | Maximum |
|---|---|---|
| Major | 4.3512 in | 4.375 in |
| Pitch | 4.2039 in | 4.2126 in |
| Minor | Not specified | Not specified |
External minor diameter product limits are not specified here; the basic minor reference is not an external root limit.
Machining preparation
Cutting tap: estimated pre-drill diameter 4.125 in using D − P. Finished-thread minor limits do not specify drilled-hole tolerance.
Forming tap: indicative pre-drill diameter 4.2628 in at approximately 66% formation. Check the selected tool and material.
Thread milling: finished pitch and minor limits above are available for planning; no cutting-tap pre-drill recommendation or CNC compensation command is supplied for milling.