M9 × 1.25 Metric Thread Dimensions
Nominal diameter 9 mm; pitch 1.25 mm.
Basic geometry
Basic pitch diameter: 8.188 mm. Basic minor diameter: 7.647 mm. Basic major diameter: 9 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 9 | Not specified |
| Pitch | 8.188 | 8.288 |
| Minor | 7.647 | 7.817 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 9.028 | Not specified |
| Pitch | 8.216 | 8.341 |
| Minor | 7.675 | 7.887 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 9 | Not specified |
| Pitch | 8.188 | 8.313 |
| Minor | 7.647 | 7.859 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 9.028 | Not specified |
| Pitch | 8.216 | 8.376 |
| Minor | 7.675 | 7.94 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 9 | Not specified |
| Pitch | 8.188 | 8.348 |
| Minor | 7.647 | 7.912 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 9.028 | Not specified |
| Pitch | 8.216 | 8.416 |
| Minor | 7.675 | 8.01 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 9 | Not specified |
| Pitch | 8.188 | 8.388 |
| Minor | 7.647 | 7.982 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 9.028 | Not specified |
| Pitch | 8.216 | 8.466 |
| Minor | 7.675 | 8.1 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 9 | Not specified |
| Pitch | 8.188 | 8.438 |
| Minor | 7.647 | 8.072 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 8.76 | 8.972 |
| Pitch | 8.042 | 8.16 |
| Root d3 | 7.272 | 7.438 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 8.76 | 8.972 |
| Pitch | 8.085 | 8.16 |
| Root d3 | 7.315 | 7.438 |
Cutting tap preparation
Pre-drill recommendation: 7.75 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 8.45 mm. Approximate formation model. Estimated formation: 64.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.