M9 × 0.5 Metric Thread Dimensions
Nominal diameter 9 mm; pitch 0.5 mm.
Basic geometry
Basic pitch diameter: 8.675 mm. Basic minor diameter: 8.459 mm. Basic major diameter: 9 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 9 | Not specified |
| Pitch | 8.675 | 8.746 |
| Minor | 8.459 | 8.549 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 9.02 | Not specified |
| Pitch | 8.695 | 8.785 |
| Minor | 8.479 | 8.591 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 9 | Not specified |
| Pitch | 8.675 | 8.765 |
| Minor | 8.459 | 8.571 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 9.02 | Not specified |
| Pitch | 8.695 | 8.807 |
| Minor | 8.479 | 8.619 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 9 | Not specified |
| Pitch | 8.675 | 8.787 |
| Minor | 8.459 | 8.599 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 8.874 | 8.98 |
| Pitch | 8.57 | 8.655 |
| Root d3 | 8.262 | 8.367 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 8.874 | 8.98 |
| Pitch | 8.602 | 8.655 |
| Root d3 | 8.294 | 8.367 |
Cutting tap preparation
Pre-drill recommendation: 8.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 8.78 mm. Approximate formation model. Estimated formation: 64.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.