M9 × 1 Metric Thread Dimensions
Nominal diameter 9 mm; pitch 1 mm.
Basic geometry
Basic pitch diameter: 8.35 mm. Basic minor diameter: 7.917 mm. Basic major diameter: 9 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 9 | Not specified |
| Pitch | 8.35 | 8.445 |
| Minor | 7.917 | 8.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 9.026 | Not specified |
| Pitch | 8.376 | 8.494 |
| Minor | 7.943 | 8.133 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 9 | Not specified |
| Pitch | 8.35 | 8.468 |
| Minor | 7.917 | 8.107 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 9.026 | Not specified |
| Pitch | 8.376 | 8.526 |
| Minor | 7.943 | 8.179 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 9 | Not specified |
| Pitch | 8.35 | 8.5 |
| Minor | 7.917 | 8.153 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 9.026 | Not specified |
| Pitch | 8.376 | 8.566 |
| Minor | 7.943 | 8.243 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 9 | Not specified |
| Pitch | 8.35 | 8.54 |
| Minor | 7.917 | 8.217 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 9.026 | Not specified |
| Pitch | 8.376 | 8.612 |
| Minor | 7.943 | 8.318 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 9 | Not specified |
| Pitch | 8.35 | 8.586 |
| Minor | 7.917 | 8.292 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 8.794 | 8.974 |
| Pitch | 8.212 | 8.324 |
| Root d3 | 7.596 | 7.747 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 8.794 | 8.974 |
| Pitch | 8.253 | 8.324 |
| Root d3 | 7.637 | 7.747 |
Cutting tap preparation
Pre-drill recommendation: 8 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 8.55 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.