M8 × 1 Metric Thread Dimensions
Nominal diameter 8 mm; pitch 1 mm.
Basic geometry
Basic pitch diameter: 7.35 mm. Basic minor diameter: 6.917 mm. Basic major diameter: 8 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 8 | Not specified |
| Pitch | 7.35 | 7.445 |
| Minor | 6.917 | 7.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 8.026 | Not specified |
| Pitch | 7.376 | 7.494 |
| Minor | 6.943 | 7.133 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 8 | Not specified |
| Pitch | 7.35 | 7.468 |
| Minor | 6.917 | 7.107 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 8.026 | Not specified |
| Pitch | 7.376 | 7.526 |
| Minor | 6.943 | 7.179 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 8 | Not specified |
| Pitch | 7.35 | 7.5 |
| Minor | 6.917 | 7.153 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 8.026 | Not specified |
| Pitch | 7.376 | 7.566 |
| Minor | 6.943 | 7.243 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 8 | Not specified |
| Pitch | 7.35 | 7.54 |
| Minor | 6.917 | 7.217 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 8.026 | Not specified |
| Pitch | 7.376 | 7.612 |
| Minor | 6.943 | 7.318 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 8 | Not specified |
| Pitch | 7.35 | 7.586 |
| Minor | 6.917 | 7.292 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 7.794 | 7.974 |
| Pitch | 7.212 | 7.324 |
| Root d3 | 6.596 | 6.747 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 7.794 | 7.974 |
| Pitch | 7.253 | 7.324 |
| Root d3 | 6.637 | 6.747 |
Cutting tap preparation
Pre-drill recommendation: 7 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 7.55 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.