M8 × 0.5 Metric Thread Dimensions
Nominal diameter 8 mm; pitch 0.5 mm.
Basic geometry
Basic pitch diameter: 7.675 mm. Basic minor diameter: 7.459 mm. Basic major diameter: 8 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 8 | Not specified |
| Pitch | 7.675 | 7.746 |
| Minor | 7.459 | 7.549 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 8.02 | Not specified |
| Pitch | 7.695 | 7.785 |
| Minor | 7.479 | 7.591 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 8 | Not specified |
| Pitch | 7.675 | 7.765 |
| Minor | 7.459 | 7.571 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 8.02 | Not specified |
| Pitch | 7.695 | 7.807 |
| Minor | 7.479 | 7.619 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 8 | Not specified |
| Pitch | 7.675 | 7.787 |
| Minor | 7.459 | 7.599 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 7.874 | 7.98 |
| Pitch | 7.57 | 7.655 |
| Root d3 | 7.262 | 7.367 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 7.874 | 7.98 |
| Pitch | 7.602 | 7.655 |
| Root d3 | 7.294 | 7.367 |
Cutting tap preparation
Pre-drill recommendation: 7.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 7.78 mm. Approximate formation model. Estimated formation: 64.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.