M8 × 0.75 Metric Thread Dimensions
Nominal diameter 8 mm; pitch 0.75 mm.
Basic geometry
Basic pitch diameter: 7.513 mm. Basic minor diameter: 7.188 mm. Basic major diameter: 8 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 8 | Not specified |
| Pitch | 7.513 | 7.598 |
| Minor | 7.188 | 7.306 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 8.022 | Not specified |
| Pitch | 7.535 | 7.641 |
| Minor | 7.21 | 7.36 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 8 | Not specified |
| Pitch | 7.513 | 7.619 |
| Minor | 7.188 | 7.338 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 8.022 | Not specified |
| Pitch | 7.535 | 7.667 |
| Minor | 7.21 | 7.4 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 8 | Not specified |
| Pitch | 7.513 | 7.645 |
| Minor | 7.188 | 7.378 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 8.022 | Not specified |
| Pitch | 7.535 | 7.705 |
| Minor | 7.21 | 7.446 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 8 | Not specified |
| Pitch | 7.513 | 7.683 |
| Minor | 7.188 | 7.424 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 7.838 | 7.978 |
| Pitch | 7.391 | 7.491 |
| Root d3 | 6.929 | 7.058 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 7.838 | 7.978 |
| Pitch | 7.428 | 7.491 |
| Root d3 | 6.966 | 7.058 |
Cutting tap preparation
Pre-drill recommendation: 7.25 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 7.65 mm. Approximate formation model. Estimated formation: 68.6%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.