M82 × 2 Metric Thread Dimensions
Nominal diameter 82 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 80.701 mm. Basic minor diameter: 79.835 mm. Basic major diameter: 82 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 82 | Not specified |
| Pitch | 80.701 | 80.851 |
| Minor | 79.835 | 80.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 82.038 | Not specified |
| Pitch | 80.739 | 80.929 |
| Minor | 79.873 | 80.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 82 | Not specified |
| Pitch | 80.701 | 80.891 |
| Minor | 79.835 | 80.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 82.038 | Not specified |
| Pitch | 80.739 | 80.975 |
| Minor | 79.873 | 80.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 82 | Not specified |
| Pitch | 80.701 | 80.937 |
| Minor | 79.835 | 80.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 82.038 | Not specified |
| Pitch | 80.739 | 81.039 |
| Minor | 79.873 | 80.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 82 | Not specified |
| Pitch | 80.701 | 81.001 |
| Minor | 79.835 | 80.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 82.038 | Not specified |
| Pitch | 80.739 | 81.114 |
| Minor | 79.873 | 80.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 82 | Not specified |
| Pitch | 80.701 | 81.076 |
| Minor | 79.835 | 80.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 81.682 | 81.962 |
| Pitch | 80.483 | 80.663 |
| Root d3 | 79.251 | 79.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 81.682 | 81.962 |
| Pitch | 80.551 | 80.663 |
| Root d3 | 79.319 | 79.508 |
Cutting tap preparation
Pre-drill recommendation: 80 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 81.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.