M7 × 1 Metric Thread Dimensions
Nominal diameter 7 mm; pitch 1 mm.
Basic geometry
Basic pitch diameter: 6.35 mm. Basic minor diameter: 5.917 mm. Basic major diameter: 7 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 7 | Not specified |
| Pitch | 6.35 | 6.445 |
| Minor | 5.917 | 6.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 7.026 | Not specified |
| Pitch | 6.376 | 6.494 |
| Minor | 5.943 | 6.133 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 7 | Not specified |
| Pitch | 6.35 | 6.468 |
| Minor | 5.917 | 6.107 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 7.026 | Not specified |
| Pitch | 6.376 | 6.526 |
| Minor | 5.943 | 6.179 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 7 | Not specified |
| Pitch | 6.35 | 6.5 |
| Minor | 5.917 | 6.153 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 7.026 | Not specified |
| Pitch | 6.376 | 6.566 |
| Minor | 5.943 | 6.243 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 7 | Not specified |
| Pitch | 6.35 | 6.54 |
| Minor | 5.917 | 6.217 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 7.026 | Not specified |
| Pitch | 6.376 | 6.612 |
| Minor | 5.943 | 6.318 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 7 | Not specified |
| Pitch | 6.35 | 6.586 |
| Minor | 5.917 | 6.292 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 6.794 | 6.974 |
| Pitch | 6.212 | 6.324 |
| Root d3 | 5.596 | 5.747 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 6.794 | 6.974 |
| Pitch | 6.253 | 6.324 |
| Root d3 | 5.637 | 5.747 |
Cutting tap preparation
Pre-drill recommendation: 6 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 6.55 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.