M7 × 0.5 Metric Thread Dimensions
Nominal diameter 7 mm; pitch 0.5 mm.
Basic geometry
Basic pitch diameter: 6.675 mm. Basic minor diameter: 6.459 mm. Basic major diameter: 7 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 7 | Not specified |
| Pitch | 6.675 | 6.746 |
| Minor | 6.459 | 6.549 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 7.02 | Not specified |
| Pitch | 6.695 | 6.785 |
| Minor | 6.479 | 6.591 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 7 | Not specified |
| Pitch | 6.675 | 6.765 |
| Minor | 6.459 | 6.571 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 7.02 | Not specified |
| Pitch | 6.695 | 6.807 |
| Minor | 6.479 | 6.619 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 7 | Not specified |
| Pitch | 6.675 | 6.787 |
| Minor | 6.459 | 6.599 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 6.874 | 6.98 |
| Pitch | 6.57 | 6.655 |
| Root d3 | 6.262 | 6.367 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 6.874 | 6.98 |
| Pitch | 6.602 | 6.655 |
| Root d3 | 6.294 | 6.367 |
Cutting tap preparation
Pre-drill recommendation: 6.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 6.78 mm. Approximate formation model. Estimated formation: 64.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.