M7 × 0.75 Metric Thread Dimensions
Nominal diameter 7 mm; pitch 0.75 mm.
Basic geometry
Basic pitch diameter: 6.513 mm. Basic minor diameter: 6.188 mm. Basic major diameter: 7 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 7 | Not specified |
| Pitch | 6.513 | 6.598 |
| Minor | 6.188 | 6.306 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 7.022 | Not specified |
| Pitch | 6.535 | 6.641 |
| Minor | 6.21 | 6.36 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 7 | Not specified |
| Pitch | 6.513 | 6.619 |
| Minor | 6.188 | 6.338 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 7.022 | Not specified |
| Pitch | 6.535 | 6.667 |
| Minor | 6.21 | 6.4 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 7 | Not specified |
| Pitch | 6.513 | 6.645 |
| Minor | 6.188 | 6.378 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 7.022 | Not specified |
| Pitch | 6.535 | 6.705 |
| Minor | 6.21 | 6.446 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 7 | Not specified |
| Pitch | 6.513 | 6.683 |
| Minor | 6.188 | 6.424 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 6.838 | 6.978 |
| Pitch | 6.391 | 6.491 |
| Root d3 | 5.929 | 6.058 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 6.838 | 6.978 |
| Pitch | 6.428 | 6.491 |
| Root d3 | 5.966 | 6.058 |
Cutting tap preparation
Pre-drill recommendation: 6.25 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 6.65 mm. Approximate formation model. Estimated formation: 68.6%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.