M75 × 6 Metric Thread Dimensions
Nominal diameter 75 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 71.103 mm. Basic minor diameter: 68.505 mm. Basic major diameter: 75 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 75 | Not specified |
| Pitch | 71.103 | 71.339 |
| Minor | 68.505 | 69.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 75.08 | Not specified |
| Pitch | 71.183 | 71.483 |
| Minor | 68.585 | 69.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 75 | Not specified |
| Pitch | 71.103 | 71.403 |
| Minor | 68.505 | 69.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 75.08 | Not specified |
| Pitch | 71.183 | 71.558 |
| Minor | 68.585 | 69.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 75 | Not specified |
| Pitch | 71.103 | 71.478 |
| Minor | 68.505 | 69.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 75.08 | Not specified |
| Pitch | 71.183 | 71.658 |
| Minor | 68.585 | 69.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 75 | Not specified |
| Pitch | 71.103 | 71.578 |
| Minor | 68.505 | 69.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 75.08 | Not specified |
| Pitch | 71.183 | 71.783 |
| Minor | 68.585 | 69.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 75 | Not specified |
| Pitch | 71.103 | 71.703 |
| Minor | 68.505 | 69.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 74.32 | 74.92 |
| Pitch | 70.743 | 71.023 |
| Root d3 | 67.047 | 67.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 74.32 | 74.92 |
| Pitch | 70.843 | 71.023 |
| Root d3 | 67.147 | 67.559 |
Cutting tap preparation
Pre-drill recommendation: 69 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 72.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.