M75 × 3 Metric Thread Dimensions
Nominal diameter 75 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 73.051 mm. Basic minor diameter: 71.752 mm. Basic major diameter: 75 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 75 | Not specified |
| Pitch | 73.051 | 73.231 |
| Minor | 71.752 | 72.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 75.048 | Not specified |
| Pitch | 73.099 | 73.323 |
| Minor | 71.8 | 72.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 75 | Not specified |
| Pitch | 73.051 | 73.275 |
| Minor | 71.752 | 72.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 75.048 | Not specified |
| Pitch | 73.099 | 73.379 |
| Minor | 71.8 | 72.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 75 | Not specified |
| Pitch | 73.051 | 73.331 |
| Minor | 71.752 | 72.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 75.048 | Not specified |
| Pitch | 73.099 | 73.454 |
| Minor | 71.8 | 72.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 75 | Not specified |
| Pitch | 73.051 | 73.406 |
| Minor | 71.752 | 72.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 75.048 | Not specified |
| Pitch | 73.099 | 73.549 |
| Minor | 71.8 | 72.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 75 | Not specified |
| Pitch | 73.051 | 73.501 |
| Minor | 71.752 | 72.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 74.577 | 74.952 |
| Pitch | 72.791 | 73.003 |
| Root d3 | 70.943 | 71.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 74.577 | 74.952 |
| Pitch | 72.871 | 73.003 |
| Root d3 | 71.023 | 71.271 |
Cutting tap preparation
Pre-drill recommendation: 72 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 73.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.