M75 × 4 Metric Thread Dimensions
Nominal diameter 75 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 72.402 mm. Basic minor diameter: 70.67 mm. Basic major diameter: 75 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 75 | Not specified |
| Pitch | 72.402 | 72.602 |
| Minor | 70.67 | 71.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 75.06 | Not specified |
| Pitch | 72.462 | 72.712 |
| Minor | 70.73 | 71.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 75 | Not specified |
| Pitch | 72.402 | 72.652 |
| Minor | 70.67 | 71.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 75.06 | Not specified |
| Pitch | 72.462 | 72.777 |
| Minor | 70.73 | 71.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 75 | Not specified |
| Pitch | 72.402 | 72.717 |
| Minor | 70.67 | 71.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 75.06 | Not specified |
| Pitch | 72.462 | 72.862 |
| Minor | 70.73 | 71.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 75 | Not specified |
| Pitch | 72.402 | 72.802 |
| Minor | 70.67 | 71.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 75.06 | Not specified |
| Pitch | 72.462 | 72.962 |
| Minor | 70.73 | 71.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 75 | Not specified |
| Pitch | 72.402 | 72.902 |
| Minor | 70.67 | 71.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 74.465 | 74.94 |
| Pitch | 72.106 | 72.342 |
| Root d3 | 69.642 | 70.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 74.465 | 74.94 |
| Pitch | 72.192 | 72.342 |
| Root d3 | 69.728 | 70.033 |
Cutting tap preparation
Pre-drill recommendation: 71 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 73.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.