M70 × 3 Metric Thread Dimensions
Nominal diameter 70 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 68.051 mm. Basic minor diameter: 66.752 mm. Basic major diameter: 70 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 70 | Not specified |
| Pitch | 68.051 | 68.231 |
| Minor | 66.752 | 67.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 70.048 | Not specified |
| Pitch | 68.099 | 68.323 |
| Minor | 66.8 | 67.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 70 | Not specified |
| Pitch | 68.051 | 68.275 |
| Minor | 66.752 | 67.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 70.048 | Not specified |
| Pitch | 68.099 | 68.379 |
| Minor | 66.8 | 67.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 70 | Not specified |
| Pitch | 68.051 | 68.331 |
| Minor | 66.752 | 67.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 70.048 | Not specified |
| Pitch | 68.099 | 68.454 |
| Minor | 66.8 | 67.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 70 | Not specified |
| Pitch | 68.051 | 68.406 |
| Minor | 66.752 | 67.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 70.048 | Not specified |
| Pitch | 68.099 | 68.549 |
| Minor | 66.8 | 67.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 70 | Not specified |
| Pitch | 68.051 | 68.501 |
| Minor | 66.752 | 67.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 69.577 | 69.952 |
| Pitch | 67.791 | 68.003 |
| Root d3 | 65.943 | 66.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 69.577 | 69.952 |
| Pitch | 67.871 | 68.003 |
| Root d3 | 66.023 | 66.271 |
Cutting tap preparation
Pre-drill recommendation: 67 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 68.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.