M70 × 1.5 Metric Thread Dimensions
Nominal diameter 70 mm; pitch 1.5 mm.
Basic geometry
Basic pitch diameter: 69.026 mm. Basic minor diameter: 68.376 mm. Basic major diameter: 70 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 70 | Not specified |
| Pitch | 69.026 | 69.158 |
| Minor | 68.376 | 68.566 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 70.032 | Not specified |
| Pitch | 69.058 | 69.228 |
| Minor | 68.408 | 68.644 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 70 | Not specified |
| Pitch | 69.026 | 69.196 |
| Minor | 68.376 | 68.612 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 70.032 | Not specified |
| Pitch | 69.058 | 69.27 |
| Minor | 68.408 | 68.708 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 70 | Not specified |
| Pitch | 69.026 | 69.238 |
| Minor | 68.376 | 68.676 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 70.032 | Not specified |
| Pitch | 69.058 | 69.323 |
| Minor | 68.408 | 68.783 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 70 | Not specified |
| Pitch | 69.026 | 69.291 |
| Minor | 68.376 | 68.751 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 70.032 | Not specified |
| Pitch | 69.058 | 69.393 |
| Minor | 68.408 | 68.883 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 70 | Not specified |
| Pitch | 69.026 | 69.361 |
| Minor | 68.376 | 68.851 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 69.732 | 69.968 |
| Pitch | 68.834 | 68.994 |
| Root d3 | 67.91 | 68.128 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 69.732 | 69.968 |
| Pitch | 68.894 | 68.994 |
| Root d3 | 67.97 | 68.128 |
Cutting tap preparation
Pre-drill recommendation: 68.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 69.3 mm. Approximate formation model. Estimated formation: 68.6%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.