M70 × 2 Metric Thread Dimensions
Nominal diameter 70 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 68.701 mm. Basic minor diameter: 67.835 mm. Basic major diameter: 70 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 70 | Not specified |
| Pitch | 68.701 | 68.851 |
| Minor | 67.835 | 68.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 70.038 | Not specified |
| Pitch | 68.739 | 68.929 |
| Minor | 67.873 | 68.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 70 | Not specified |
| Pitch | 68.701 | 68.891 |
| Minor | 67.835 | 68.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 70.038 | Not specified |
| Pitch | 68.739 | 68.975 |
| Minor | 67.873 | 68.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 70 | Not specified |
| Pitch | 68.701 | 68.937 |
| Minor | 67.835 | 68.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 70.038 | Not specified |
| Pitch | 68.739 | 69.039 |
| Minor | 67.873 | 68.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 70 | Not specified |
| Pitch | 68.701 | 69.001 |
| Minor | 67.835 | 68.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 70.038 | Not specified |
| Pitch | 68.739 | 69.114 |
| Minor | 67.873 | 68.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 70 | Not specified |
| Pitch | 68.701 | 69.076 |
| Minor | 67.835 | 68.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 69.682 | 69.962 |
| Pitch | 68.483 | 68.663 |
| Root d3 | 67.251 | 67.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 69.682 | 69.962 |
| Pitch | 68.551 | 68.663 |
| Root d3 | 67.319 | 67.508 |
Cutting tap preparation
Pre-drill recommendation: 68 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 69.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.