M6 × 0.8 Metric Thread Dimensions
Nominal diameter 6 mm; pitch 0.8 mm.
Basic geometry
Basic pitch diameter: 5.48 mm. Basic minor diameter: 5.134 mm. Basic major diameter: 6 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 6 | Not specified |
| Pitch | 5.48 | 5.565 |
| Minor | 5.134 | 5.259 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 6.024 | Not specified |
| Pitch | 5.504 | 5.61 |
| Minor | 5.158 | 5.318 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 6 | Not specified |
| Pitch | 5.48 | 5.586 |
| Minor | 5.134 | 5.294 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 6.024 | Not specified |
| Pitch | 5.504 | 5.636 |
| Minor | 5.158 | 5.358 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 6 | Not specified |
| Pitch | 5.48 | 5.612 |
| Minor | 5.134 | 5.334 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 6.024 | Not specified |
| Pitch | 5.504 | 5.674 |
| Minor | 5.158 | 5.408 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 6 | Not specified |
| Pitch | 5.48 | 5.65 |
| Minor | 5.134 | 5.384 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 5.826 | 5.976 |
| Pitch | 5.356 | 5.456 |
| Root d3 | 4.864 | 4.995 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 5.826 | 5.976 |
| Pitch | 5.393 | 5.456 |
| Root d3 | 4.901 | 4.995 |
Cutting tap preparation
Pre-drill recommendation: 5.2 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 5.65 mm. Approximate formation model. Estimated formation: 64.3%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.