M6 × 0.5 Metric Thread Dimensions
Nominal diameter 6 mm; pitch 0.5 mm.
Basic geometry
Basic pitch diameter: 5.675 mm. Basic minor diameter: 5.459 mm. Basic major diameter: 6 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 6 | Not specified |
| Pitch | 5.675 | 5.746 |
| Minor | 5.459 | 5.549 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 6.02 | Not specified |
| Pitch | 5.695 | 5.785 |
| Minor | 5.479 | 5.591 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 6 | Not specified |
| Pitch | 5.675 | 5.765 |
| Minor | 5.459 | 5.571 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 6.02 | Not specified |
| Pitch | 5.695 | 5.807 |
| Minor | 5.479 | 5.619 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 6 | Not specified |
| Pitch | 5.675 | 5.787 |
| Minor | 5.459 | 5.599 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 5.874 | 5.98 |
| Pitch | 5.57 | 5.655 |
| Root d3 | 5.262 | 5.367 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 5.874 | 5.98 |
| Pitch | 5.602 | 5.655 |
| Root d3 | 5.294 | 5.367 |
Cutting tap preparation
Pre-drill recommendation: 5.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 5.78 mm. Approximate formation model. Estimated formation: 64.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.