M6 × 0.7 Metric Thread Dimensions
Nominal diameter 6 mm; pitch 0.7 mm.
Basic geometry
Basic pitch diameter: 5.545 mm. Basic minor diameter: 5.242 mm. Basic major diameter: 6 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 6 | Not specified |
| Pitch | 5.545 | 5.625 |
| Minor | 5.242 | 5.354 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 6.022 | Not specified |
| Pitch | 5.567 | 5.667 |
| Minor | 5.264 | 5.404 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 6 | Not specified |
| Pitch | 5.545 | 5.645 |
| Minor | 5.242 | 5.382 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 6.022 | Not specified |
| Pitch | 5.567 | 5.692 |
| Minor | 5.264 | 5.444 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 6 | Not specified |
| Pitch | 5.545 | 5.67 |
| Minor | 5.242 | 5.422 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 6.022 | Not specified |
| Pitch | 5.567 | 5.727 |
| Minor | 5.264 | 5.488 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 6 | Not specified |
| Pitch | 5.545 | 5.705 |
| Minor | 5.242 | 5.466 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 5.838 | 5.978 |
| Pitch | 5.428 | 5.523 |
| Root d3 | 4.997 | 5.119 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 5.838 | 5.978 |
| Pitch | 5.463 | 5.523 |
| Root d3 | 5.032 | 5.119 |
Cutting tap preparation
Pre-drill recommendation: 5.3 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 5.7 mm. Approximate formation model. Estimated formation: 63.0%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.