M62 × 4 Metric Thread Dimensions
Nominal diameter 62 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 59.402 mm. Basic minor diameter: 57.67 mm. Basic major diameter: 62 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 62 | Not specified |
| Pitch | 59.402 | 59.602 |
| Minor | 57.67 | 58.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 62.06 | Not specified |
| Pitch | 59.462 | 59.712 |
| Minor | 57.73 | 58.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 62 | Not specified |
| Pitch | 59.402 | 59.652 |
| Minor | 57.67 | 58.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 62.06 | Not specified |
| Pitch | 59.462 | 59.777 |
| Minor | 57.73 | 58.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 62 | Not specified |
| Pitch | 59.402 | 59.717 |
| Minor | 57.67 | 58.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 62.06 | Not specified |
| Pitch | 59.462 | 59.862 |
| Minor | 57.73 | 58.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 62 | Not specified |
| Pitch | 59.402 | 59.802 |
| Minor | 57.67 | 58.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 62.06 | Not specified |
| Pitch | 59.462 | 59.962 |
| Minor | 57.73 | 58.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 62 | Not specified |
| Pitch | 59.402 | 59.902 |
| Minor | 57.67 | 58.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 61.465 | 61.94 |
| Pitch | 59.106 | 59.342 |
| Root d3 | 56.642 | 57.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 61.465 | 61.94 |
| Pitch | 59.192 | 59.342 |
| Root d3 | 56.728 | 57.033 |
Cutting tap preparation
Pre-drill recommendation: 58 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 60.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.