M62 × 3 Metric Thread Dimensions
Nominal diameter 62 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 60.051 mm. Basic minor diameter: 58.752 mm. Basic major diameter: 62 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 62 | Not specified |
| Pitch | 60.051 | 60.231 |
| Minor | 58.752 | 59.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 62.048 | Not specified |
| Pitch | 60.099 | 60.323 |
| Minor | 58.8 | 59.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 62 | Not specified |
| Pitch | 60.051 | 60.275 |
| Minor | 58.752 | 59.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 62.048 | Not specified |
| Pitch | 60.099 | 60.379 |
| Minor | 58.8 | 59.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 62 | Not specified |
| Pitch | 60.051 | 60.331 |
| Minor | 58.752 | 59.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 62.048 | Not specified |
| Pitch | 60.099 | 60.454 |
| Minor | 58.8 | 59.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 62 | Not specified |
| Pitch | 60.051 | 60.406 |
| Minor | 58.752 | 59.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 62.048 | Not specified |
| Pitch | 60.099 | 60.549 |
| Minor | 58.8 | 59.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 62 | Not specified |
| Pitch | 60.051 | 60.501 |
| Minor | 58.752 | 59.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 61.577 | 61.952 |
| Pitch | 59.791 | 60.003 |
| Root d3 | 57.943 | 58.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 61.577 | 61.952 |
| Pitch | 59.871 | 60.003 |
| Root d3 | 58.023 | 58.271 |
Cutting tap preparation
Pre-drill recommendation: 59 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 60.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.