M62 × 2 Metric Thread Dimensions
Nominal diameter 62 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 60.701 mm. Basic minor diameter: 59.835 mm. Basic major diameter: 62 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 62 | Not specified |
| Pitch | 60.701 | 60.851 |
| Minor | 59.835 | 60.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 62.038 | Not specified |
| Pitch | 60.739 | 60.929 |
| Minor | 59.873 | 60.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 62 | Not specified |
| Pitch | 60.701 | 60.891 |
| Minor | 59.835 | 60.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 62.038 | Not specified |
| Pitch | 60.739 | 60.975 |
| Minor | 59.873 | 60.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 62 | Not specified |
| Pitch | 60.701 | 60.937 |
| Minor | 59.835 | 60.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 62.038 | Not specified |
| Pitch | 60.739 | 61.039 |
| Minor | 59.873 | 60.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 62 | Not specified |
| Pitch | 60.701 | 61.001 |
| Minor | 59.835 | 60.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 62.038 | Not specified |
| Pitch | 60.739 | 61.114 |
| Minor | 59.873 | 60.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 62 | Not specified |
| Pitch | 60.701 | 61.076 |
| Minor | 59.835 | 60.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 61.682 | 61.962 |
| Pitch | 60.483 | 60.663 |
| Root d3 | 59.251 | 59.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 61.682 | 61.962 |
| Pitch | 60.551 | 60.663 |
| Root d3 | 59.319 | 59.508 |
Cutting tap preparation
Pre-drill recommendation: 60 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 61.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.