M58 × 4 Metric Thread Dimensions
Nominal diameter 58 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 55.402 mm. Basic minor diameter: 53.67 mm. Basic major diameter: 58 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 58 | Not specified |
| Pitch | 55.402 | 55.602 |
| Minor | 53.67 | 54.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 58.06 | Not specified |
| Pitch | 55.462 | 55.712 |
| Minor | 53.73 | 54.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 58 | Not specified |
| Pitch | 55.402 | 55.652 |
| Minor | 53.67 | 54.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 58.06 | Not specified |
| Pitch | 55.462 | 55.777 |
| Minor | 53.73 | 54.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 58 | Not specified |
| Pitch | 55.402 | 55.717 |
| Minor | 53.67 | 54.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 58.06 | Not specified |
| Pitch | 55.462 | 55.862 |
| Minor | 53.73 | 54.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 58 | Not specified |
| Pitch | 55.402 | 55.802 |
| Minor | 53.67 | 54.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 58.06 | Not specified |
| Pitch | 55.462 | 55.962 |
| Minor | 53.73 | 54.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 58 | Not specified |
| Pitch | 55.402 | 55.902 |
| Minor | 53.67 | 54.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 57.465 | 57.94 |
| Pitch | 55.106 | 55.342 |
| Root d3 | 52.642 | 53.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 57.465 | 57.94 |
| Pitch | 55.192 | 55.342 |
| Root d3 | 52.728 | 53.033 |
Cutting tap preparation
Pre-drill recommendation: 54 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 56.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.