M58 × 3 Metric Thread Dimensions
Nominal diameter 58 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 56.051 mm. Basic minor diameter: 54.752 mm. Basic major diameter: 58 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 58 | Not specified |
| Pitch | 56.051 | 56.231 |
| Minor | 54.752 | 55.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 58.048 | Not specified |
| Pitch | 56.099 | 56.323 |
| Minor | 54.8 | 55.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 58 | Not specified |
| Pitch | 56.051 | 56.275 |
| Minor | 54.752 | 55.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 58.048 | Not specified |
| Pitch | 56.099 | 56.379 |
| Minor | 54.8 | 55.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 58 | Not specified |
| Pitch | 56.051 | 56.331 |
| Minor | 54.752 | 55.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 58.048 | Not specified |
| Pitch | 56.099 | 56.454 |
| Minor | 54.8 | 55.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 58 | Not specified |
| Pitch | 56.051 | 56.406 |
| Minor | 54.752 | 55.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 58.048 | Not specified |
| Pitch | 56.099 | 56.549 |
| Minor | 54.8 | 55.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 58 | Not specified |
| Pitch | 56.051 | 56.501 |
| Minor | 54.752 | 55.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 57.577 | 57.952 |
| Pitch | 55.791 | 56.003 |
| Root d3 | 53.943 | 54.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 57.577 | 57.952 |
| Pitch | 55.871 | 56.003 |
| Root d3 | 54.023 | 54.271 |
Cutting tap preparation
Pre-drill recommendation: 55 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 56.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.