M58 × 2 Metric Thread Dimensions
Nominal diameter 58 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 56.701 mm. Basic minor diameter: 55.835 mm. Basic major diameter: 58 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 58 | Not specified |
| Pitch | 56.701 | 56.851 |
| Minor | 55.835 | 56.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 58.038 | Not specified |
| Pitch | 56.739 | 56.929 |
| Minor | 55.873 | 56.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 58 | Not specified |
| Pitch | 56.701 | 56.891 |
| Minor | 55.835 | 56.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 58.038 | Not specified |
| Pitch | 56.739 | 56.975 |
| Minor | 55.873 | 56.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 58 | Not specified |
| Pitch | 56.701 | 56.937 |
| Minor | 55.835 | 56.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 58.038 | Not specified |
| Pitch | 56.739 | 57.039 |
| Minor | 55.873 | 56.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 58 | Not specified |
| Pitch | 56.701 | 57.001 |
| Minor | 55.835 | 56.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 58.038 | Not specified |
| Pitch | 56.739 | 57.114 |
| Minor | 55.873 | 56.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 58 | Not specified |
| Pitch | 56.701 | 57.076 |
| Minor | 55.835 | 56.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 57.682 | 57.962 |
| Pitch | 56.483 | 56.663 |
| Root d3 | 55.251 | 55.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 57.682 | 57.962 |
| Pitch | 56.551 | 56.663 |
| Root d3 | 55.319 | 55.508 |
Cutting tap preparation
Pre-drill recommendation: 56 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 57.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.