M50 × 3 Metric Thread Dimensions
Nominal diameter 50 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 48.051 mm. Basic minor diameter: 46.752 mm. Basic major diameter: 50 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 50 | Not specified |
| Pitch | 48.051 | 48.231 |
| Minor | 46.752 | 47.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 50.048 | Not specified |
| Pitch | 48.099 | 48.323 |
| Minor | 46.8 | 47.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 50 | Not specified |
| Pitch | 48.051 | 48.275 |
| Minor | 46.752 | 47.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 50.048 | Not specified |
| Pitch | 48.099 | 48.379 |
| Minor | 46.8 | 47.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 50 | Not specified |
| Pitch | 48.051 | 48.331 |
| Minor | 46.752 | 47.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 50.048 | Not specified |
| Pitch | 48.099 | 48.454 |
| Minor | 46.8 | 47.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 50 | Not specified |
| Pitch | 48.051 | 48.406 |
| Minor | 46.752 | 47.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 50.048 | Not specified |
| Pitch | 48.099 | 48.549 |
| Minor | 46.8 | 47.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 50 | Not specified |
| Pitch | 48.051 | 48.501 |
| Minor | 46.752 | 47.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 49.577 | 49.952 |
| Pitch | 47.791 | 48.003 |
| Root d3 | 45.943 | 46.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 49.577 | 49.952 |
| Pitch | 47.871 | 48.003 |
| Root d3 | 46.023 | 46.271 |
Cutting tap preparation
Pre-drill recommendation: 47 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 48.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.