M50 × 2 Metric Thread Dimensions
Nominal diameter 50 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 48.701 mm. Basic minor diameter: 47.835 mm. Basic major diameter: 50 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 50 | Not specified |
| Pitch | 48.701 | 48.851 |
| Minor | 47.835 | 48.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 50.038 | Not specified |
| Pitch | 48.739 | 48.929 |
| Minor | 47.873 | 48.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 50 | Not specified |
| Pitch | 48.701 | 48.891 |
| Minor | 47.835 | 48.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 50.038 | Not specified |
| Pitch | 48.739 | 48.975 |
| Minor | 47.873 | 48.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 50 | Not specified |
| Pitch | 48.701 | 48.937 |
| Minor | 47.835 | 48.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 50.038 | Not specified |
| Pitch | 48.739 | 49.039 |
| Minor | 47.873 | 48.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 50 | Not specified |
| Pitch | 48.701 | 49.001 |
| Minor | 47.835 | 48.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 50.038 | Not specified |
| Pitch | 48.739 | 49.114 |
| Minor | 47.873 | 48.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 50 | Not specified |
| Pitch | 48.701 | 49.076 |
| Minor | 47.835 | 48.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 49.682 | 49.962 |
| Pitch | 48.483 | 48.663 |
| Root d3 | 47.251 | 47.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 49.682 | 49.962 |
| Pitch | 48.551 | 48.663 |
| Root d3 | 47.319 | 47.508 |
Cutting tap preparation
Pre-drill recommendation: 48 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 49.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.