M50 × 1.5 Metric Thread Dimensions
Nominal diameter 50 mm; pitch 1.5 mm.
Basic geometry
Basic pitch diameter: 49.026 mm. Basic minor diameter: 48.376 mm. Basic major diameter: 50 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 50 | Not specified |
| Pitch | 49.026 | 49.158 |
| Minor | 48.376 | 48.566 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 50.032 | Not specified |
| Pitch | 49.058 | 49.228 |
| Minor | 48.408 | 48.644 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 50 | Not specified |
| Pitch | 49.026 | 49.196 |
| Minor | 48.376 | 48.612 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 50.032 | Not specified |
| Pitch | 49.058 | 49.27 |
| Minor | 48.408 | 48.708 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 50 | Not specified |
| Pitch | 49.026 | 49.238 |
| Minor | 48.376 | 48.676 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 50.032 | Not specified |
| Pitch | 49.058 | 49.323 |
| Minor | 48.408 | 48.783 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 50 | Not specified |
| Pitch | 49.026 | 49.291 |
| Minor | 48.376 | 48.751 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 50.032 | Not specified |
| Pitch | 49.058 | 49.393 |
| Minor | 48.408 | 48.883 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 50 | Not specified |
| Pitch | 49.026 | 49.361 |
| Minor | 48.376 | 48.851 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 49.732 | 49.968 |
| Pitch | 48.834 | 48.994 |
| Root d3 | 47.91 | 48.128 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 49.732 | 49.968 |
| Pitch | 48.894 | 48.994 |
| Root d3 | 47.97 | 48.128 |
Cutting tap preparation
Pre-drill recommendation: 48.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 49.3 mm. Approximate formation model. Estimated formation: 68.6%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.